We are committed to providing fast, efficient, and affordable software solutions that set new standards in the software development industry.
  • R-Studio for Linux Home Page
  • R-Studio for Linux Technical Documentation

Basic RAID 4 and RAID 5 Operations


RAID 4 and RAID 5 are much similar. You may create and edit a RAID 4 object the same way as a RAID 5 one.

To create a RAID 5 object

1 Click the Create Virtual RAID button and select Create Virtual Block RAID

or select the Create Virtual Block RAID on the Create menu

> A Virtual Block RAID object will appear on the Drives panel
2 Select RAID 5 on the RAID type
3 Drag the required partitions from the Drives panel to the Parents tab
3 Drag the required partitions from the Drives panel to the Parents tab

Click to expand/collapse Other ways to add objects

You may either make R‑Studio for Linux to process your changes immediately or wait until you finish editing the RAID layout. Select or clear the Apply changes immediately checkbox on the Parents tab. Click the Apply button to apply the changes when are you through.

Note: Objects should be placed in the same order as they were in the original RAID 5. If this order is incorrect, you must change it by dragging the parents to place them in the correct order.

Object control buttons

The RAID block size and Offset (in sectors) parameters must be set the same as for the original RAID 5.

You also need to specify Block order for virtual RAID 5. You may select it on the Block order drop-down or context menu.

If the those parameters are not correct, data on the parents will not be damaged, but files from the RAID 5 cannot be recovered.

Note: You may check how correctly you have reconstructed the original RAID 5. Find a file and preview it. If the file appears correct, you have created a correct RAID 5 layout.

If your RAID 5 has an unusual configuration, you may create them manually. See Working with Advanced RAID 5 Layouts for details.

> The RAID 5 object can now be processed like regular drives/volumes

If R‑Studio for Linux detects a valid file system on the newly created RAID object, a partition object will appear on the Drives panel.

The Description Files for RAID Configurations topic shows the RAID description file for this RAID configuration.

Creating and saving your own RAID 5 configuration

You may create and save your own RAID configurations for non-standard RAIDs. You may specify Offset, Block order/size and Row count. See Working with Advanced RAID 5 Layouts for details.